REPLACEMENT SAFETY SENSORSUPC : 012381008018Shipping Dimensions : 9.60in X 8.55in X 2.75inEstimated Shipping Weight : 1.3598
$ 30.15
Chamberlain 801CB Replacement Safety Sensors
Related Posts
Skylink GM-434RTL Long Range Garage Alert Kit
The Wireless Garage Door Monitor® is designed to monitor the status of your garage door and advise you if the…
Smarthome INSTEON Wireless Motion Sensor
Turn on your INSTEON-controlled lights or appliances when you enter the room and turn them off after you’ve left. Truly…
Vigilant PPS-23PK Special Edition 130dB Electronic Rape Attack Personal Alarm With Backup Whistle plus Key Ring and Purse Clip (Pink)
The PPS23PK is a special edition PINK version of our popular PPS23 series. For this special limited edition unit, in…
3 thoughts on “Chamberlain 801CB Replacement Safety Sensors”
Leave a Reply
You must be logged in to post a comment.
Exactly what it says…,
My garage door would not close unless I held down the hard-wired switch, overriding the safety sensors. I did some looking and found that the LED’s on my sensors were supposed to light up (one should stay illuminated, and the other should illuminate when the sensors are lined up). The LED’s on my old sensors were so dim, I could only see them light up if the garage was completely dark. I took a guess that I needed new sensors. Well, long story short, I ordered these and had them in a few days. Install was a breeze, it only took about 10 minutes, and all I used was a $1 pair of wire cutters. Just remove your old sensors from their mount and cut the wires, splice the new sensor’s wires with your existing garage door opener’s wires using the included crimp connectors, and mount the sensors on the included brackets (or on your existing brackets). Everything worked like a charm, and I got to impress my wife with my handyman skills!
Was this review helpful to you?
|Before you buy,
Make sure you check the wiring on the main unit, before you purchase. A bad connection can also prevent sensors from performing. Because my sensors were also dim, I ordered this pair. Upon receiving them, I thought I would then check the wiring on the main unit–stupid me, I know. A wire was loose, and I tightened, and the old one worked. Oh, well. I also discovered that these units did not adapt to my old mounts, and I would have to build up the wall to accomodate the shorter brackets provided. So….just a warning to avoid my errors and check all connections first, and measure your brackets. That being said, it still would have been a pretty easy fix with these new units. Now I have back up sensors! Yay!
Was this review helpful to you?
|Cheap and works great.,
Installed these with no problems, works just fine. Didn’t take long to install at all and were at a good price.
Was this review helpful to you?
|