* Installation: 1.Removed transparent cover,install 2pcs “A” batteries correctly marked.Recommend use AA alkaline battery. 2.Closed transparent cover. 3.Push power swith to “Auto”. 4.Push “mode” swith to “Day”. 5.Led can first light about 20 seconds,then led light comes into normal mode.
3 thoughts on “8-LED Light Lamp PIR Auto Sensor Motion Detector”
Leave a Reply
You must be logged in to post a comment.
handyman glen,
I just a couple of these there as bright or a little brighter than most of those LED flashlights they have a off auto on switch on one side and daylight or night switch on the other side. I set these to auto & night stuck one on the porch ceiling and one on the kitchen ceiling when you get within about 10-15′ from them they turn on except during daylight and they stay on while your under them, they light up around a 20′ circle there not bright enough to read the paper like a 5-10 watt bulb, but you can see around the hole room and you can see the light switches if you need a brighter light and they stay on about 30 seconds after you leave so when you walk down the hall they turn on as you get close and stay on as you leave and you don’t have to run wires or anything. I’m going to put some more in the rest of the rooms in house. I have some other types I got on amazon that don’t have the day night setting and there grate except the one over the front door the batteries only lasted a week and the ones in the kitchen lasted around 2 weeks but these are still as bright as when I put them up 2 weeks ago.
A couple days ago lighting knocked out the power and it was great not having to run around in the dark looking for flash lights as I walk through the house the light worked just the same.
There not as good as sliced bread but you could see the bread, So you could slice it if you wanted to.
Was this review helpful to you?
Perfect for our garage steps!,
I wanted a motion sensor activated light to put in our garage so that when we go out at night, we won’t fall down the steps. This is cheap and works great (so far- have only had it for a few days). It’s a plus that it also senses light, so that if it’s already light enough in the garage to see the steps, it doesn’t come on. It stays on for about 18 seconds, which is plenty long enough for us to get down the steps and open the garage door (which has its own light). I don’t know if the length of time is adjustable, but I don’t really care. The only thing I don’t like about it are the fairly useless instructions. I just hope it lasts!
Was this review helpful to you?
Very impressed with the low price but great little product,
These were just over $5 a piece but work like champs (bought 3). The 8 LEDs give plenty of light to light a room when I get up in the middle of the night. They won’t turn on when there is already enough lights and have a reasonable distance for the motion detector. It only takes two AA batteries (not sure how long they’ll last but should be good for a few months). I have one setting on the night stand now but it can be wall mounted too. Just what I was looking for!
Was this review helpful to you?